Electronic Garment Button Pull Tensile Testing 230*280*750 mm Dimensions
Product Description
Button Pull Test Machine, to determine the holding or breaking strength of prong-ring attached snap fasteners onto garments or toys. Button Snap Pull Tester complies with ASTM PS79-96, ASTM F963 , etc.
What is our Garment Button Pull Tensile Testing Machine used for?
Garment Button Pull Tensile Testing Machine, to determine the holding or breaking strength of prong-ring attached snap fasteners onto garments or toys, also as a Push Pull Tester applies for compression and tensile testing of small samples(special attachments are available).
Garment Button Pull Tensile Testing Machine, Consists of an upper snap clamp, a lower fabric clamp and force gauge mounted on a stand, a hand wheel on the bottom of snap tester which allows fine control with convenient operation.
The snap component is gripped by the Upper Snap Clamp and the garment is fixed to the lower Fabric Clamp. By turning the hand wheel, The operator can apply a specific force and the holding force or the breaking strength can be recorded. The capability of Snap tester can be enhanced with clamps & accessories for testing of other Snaps, Jean Buttons, Four Hole Buttons & Garments Accessories such as Zippers, Bows, Appliqué, Toggles, Hooks/Bars, and D-Rings, amongst others.
The detachment of a snap or other part may be classed as small parts; whilst broken small parts may require sharp point & sharp edge testing. As a result, additional testing equipment may be recommended, such as: Small Parts Cylinder, Sharp Point Tester, Sharp Edge Tester, Button Impact Tester, etc.
What are the Included Accessories of Garment Button Pull Tensile Testing Machine?
l SANDOO Force Gauge FB-30K (300N, Resolution 2N, Accuracy +/-1%FS) - 1 Pc
l Lower Fabric Clamp, Lever Armlocking - 1 Pc
l Upper Stud Clamp - 1 Pc
l Upper Snap Clamp -1 Pc
l Three Pronged Clamp - 1 Pc
l Two Pronged Clamp with screw - 1 Pc
l Lower Grasp Button Kit - 1 Pc
l Long Nose Vise Grip - 1 Pc
l Calibration: 15 lbs Calibration Weight- 1 Pc
l Safety Goggles - 1 Pc
l Rubber Ring - 5 Pcs
l Calibration Certificate - 1 Pc
l Operation Manual - 1 Pc
Standards:
ASTM PS79-96, ASTM F963, EN 71-1, 16 CFR 1500.51-53, M&S P115A
| snap pull tester |
| Weight 45Kg |
| Dimensions 230 x 280 x 750 mm(LxWxH) |
Product Effects
Company Information
LIYI INTERNATIONAL is a professional manufacturer of various kinds of testing equipments over 24 years. LIYI products are widely used in paper products, packaging, ink printing, adhesive tapes, bags, footwear, leather products, environment, toys, baby products, hardware, electronic products, plastic products, rubber products and other industries, and applicable to all scientific research units, quality inspection institutions and academic fields.
Our Services
If you face any problems in future during testing process we promise we will give you a reply within 48 hours and solution provide within 3 working days. We can offer operation video and English operation manual. We can provide video-con.
1. Considerate Service Different countries plugs, manually change the-voltage from 110V to 220V, insurance indicator.
2.Excellent After sale Service: 12 months warranty. Besides, we can help you to repair your problem controller freely, even it's not from our factory. What you need to do is to send us the controller.
3.Commitment:We will sign a letter of commitment while we sign the contract, which will improve your confidence to us.
4.Good Packaging:
Simulation Animatronic Customer Triceratops are covered with air bubble film before put them into the wooden case, which not only has good shock absorption, impact resistance, heat sealing and also has the advantages of nontoxic, odorless, moisture corrosion, good transparency etc.
Product Tags:
|
|
Electronic Garment Button Pull Tensile Testing 230*280*750 mm Dimensions Images
|
